Your heat pump is an essential part of your home because it provides year-round comfort. But, like any home comfort system, it’s likely to experience some problems once in a while.

Let’s examine these problems and how much they might cost to repair, so you’ll have some idea before you contact an HVAC technician. Some of the most common heat pump repair problems include:

  • Heat pump won’t turn on
  • Heat pump won’t turn off
  • Heat pump won’t defrost
  • Heat pump won’t cool
  • Heat pump won’t turn on after changing thermostat
  • Heat pump won’t heat

1. Heat Pump Won’t Turn On

There are a lot of reasons why your heat pump won’t turn on, so we recommend checking all of them. Sometimes they are as simple as fixing a thermostat setting or changing your air filter.

Here’s what to check:

  • Is your thermostat on the proper setting? If you want cooling, make sure it’s set to “cool,” “auto” and that your setting is lower than the ambient temperature. If you want heating, it should be set to “heat,” “auto” and your setting should be higher than the current temperature. If you use a programmable thermostat, replace the batteries if the screen appears jumbled or blank.
  • Has the circuit breaker been tripped? Your heat pump won’t be able to run if it lacks power. Reset the corresponding breaker if it’s facing the outside of the electrical panel.
  • Is the air filter dirty? A dirty air filter is troublesome for your heat pump. If you can’t see light through it, it’s time to replace it.

If these steps don’t fix the issue, you’ll need to contact a heating and cooling company like MPC Heating & Cooling.

Estimated Repair Cost

This problem can be complicated, so how much it costs to fix it will depend on what’s wrong.

2. Heat Pump Won’t Turn Off

If it’s very hot or cold outside, your heat pump may need to run longer than normal to achieve your desired temperature.

If the weather is typical, check that your thermostat is set correctly and running normally. If the fan setting is at “on,” the blower motor on your air handler will go 24/7. So, it’ll appear as though your heat pump is running all the time. Constantly running the blower can keep humidity levels in check, but it’ll also increase your electrical bills.

If your thermostat is set properly, there are several other problems that could be causing your heat pump to run all the time. They include:

  • A new thermostat that isn’t compatible with your heat pump.
  • A malfunctioning compressor contactor, which controls the flow of electricity.
  • Leaky ductwork.

Estimated Repair Cost

This can be related to many issues, so your heat pump repair cost will depend on the problem and how difficult it is.

3. Heat Pump Won’t Defrost

Every now and then during cold weather, your heat pump will temporarily go into cooling mode. This will melt light frost and ice that normally accumulates on the coils. A heat pump that becomes totally frozen may have difficulty heating your home or shut down completely.

Here are several reasons why this might be happening:

  • Your heat pump doesn’t have sufficient airflow because it’s blocked by snow, bushes or yard debris.
  • Your gutters are dripping water on top of your heat pump, creating an icy buildup.
  • A part is not working, which may consist of the reversing valve, relays, controls or sensors.
  • The outdoor fan motor is damaged, dying or dead.
  • Your heat pump has a refrigerant leak. This is likely if you’re hearing bubbling or hissing noises. Or if you notice a sweet, formaldehyde-like odor close to the outdoor unit.

Estimated Repair Cost

Like we discussed before, there are many reasons why your heat pump won’t defrost. But here are a few estimated costs for some of these issues. Keep in mind your cost may vary based on your heat pump brand, model and the severity of the problem.

  • Replace reversing valve: $200–$600
  • Replace outdoor fan motor: $250–$650
  • Repair refrigerant leak: Depends on the kind of refrigerant your heat pump uses. R-22 Freon is higher priced since it’s no longer being produced.

4. Heat Pump Won’t Cool

Just like a heat pump that won’t turn on, a heat pump that won’t cool can be connected to many issues. We advise checking for:

  • Ideal thermostat settings
  • Tripped circuit breakers
  • A dirty air filter
  • Ice on your heat pump

If there’s nothing faulty with your thermostat, circuit breakers or air filter, you’ll need help from an HVAC technician to diagnose a problem with your ductwork or an iced-over heat pump. Like we reviewed earlier, a heat pump that won’t defrost might have a problem with its reversing valve, outdoor fan motor or a refrigerant leak.

Estimated Repair Costs

These repair costs are estimates. Your total expense may vary based on your heat pump brand, model and the extent of the problem.

  • Replace reversing valve: $200–$600
  • Replace outdoor fan motor: $250–$650
  • Repair refrigerant leak: Depends on the kind of refrigerant your heat pump uses. R-22 Freon is pricier since it’s no longer being produced.
  • Seal leaky ductwork: Depends on house size.

5. Heat Pump Won’t Turn on After Changing Thermostat

If your heat pump won’t turn on after switching the thermostat, the problem is probably connected to your new thermostat. While you can use just about any thermostat with a furnace, the same isn’t accurate for heat pumps, especially if you have backup or emergency heating.

You can check your new thermostat by switching the fan mode to “on.” If you don’t hear the blower motor start in your air handler, there’s probably a problem with the thermostat.

A couple other common thermostat problems involve:

  • Wiring was done wrong.
  • Thermostat isn’t communicating with heat pump.
  • Thermostat is in emergency heat mode, which requires a reset.

It’s recommended to have a heating and cooling professional recommend a thermostat and expertly install it. That way, you’ll avoid any compatibility or wiring problems.

Estimated Repair Costs

The cost of professional thermostat installation depends greatly on what type of thermostat you want. While programmable thermostats are cheaper, they lack the advanced features and convenience of a smart thermostat.

6. Heat Pump Won’t Heat

A heat pump that won’t heat is linked to similar problems with a heat pump that won’t cool. We encourage checking for:

  • Appropriate thermostat settings
  • Tripped circuit breakers
  • A dirty air filter
  • Ice on your heat pump

An icy heat pump or leaky ductwork will require the help of an HVAC technician. Ductwork is tricky to reach since it’s located behind walls and numerous issues can cause your heat pump to freeze up.

Estimated Repair Costs

These repair costs are estimates. Your total cost may vary based on your heat pump brand, model and the level of the problem.

  • Replace reversing valve: $200–$600
  • Replace outdoor fan motor: $250–$650
  • Repair refrigerant leak: Depends on the kind of refrigerant your heat pump uses. R-22 Freon is pricier since it’s no longer being manufactured.
  • Seal leaky ductwork: Depends on house size.

Resolve Your Heat Pump Problems Quickly and Affordably with Our Help

Dealing with a malfunctioning heat pump can be annoying, but not when you contact MPC Heating & Cooling. Our pros have been delivering the quality, affordable heat pump repair Chadron homeowners have relied on since {year}. Get in touch with us at 308-832-4321 to secure your free estimate now.

Average repair costs are sourced from Fixr, which compiles estimates based on nationwide averages.